Common Features for all Models

  • Multi-Zone (number of zones dependant on model)
  • Auto Calibration (Automatically calibrates itself up to Environmental Conditions)
  • Human friendly VLF technology.
  • Green/red bicolor traffic through LEDs, Graphic zone display.
  • Multi sensitivity levels, Fixed International Security Standards, 246 adjustable sensitivity steps at each security level
  • Superior Discrimination
  • Metal Density Display at 10-level-VU meter with green, yellow, red LEDs
  • Alarm counter & Five Digit incoming counters (Visible/invisible)
  • Environment magnetic noise level detection display on LCD Screen Integrated high-tech filter circuitry eliminates magnetic & electrical interference.
  • Four-digit changeable digital Pin Code.
  • Automatic Failure Display plus Continuous Self-Checking of Key Parameters
  • Reloading the factory default settings by one-touch button.
  • Easy programming and monitoring with LCD display.
  • Standard menu in English, German, Spanish and Turkish
  • Relay outputs for CCTV, controlling turnstiles, etc. on Alarms
  • Adjustable audio alarm at 10 tones/level plus muting
  • Easy-to-mount and assemble walk through metal detector (15 minutes)
  • Multiple Installation and Operation without interface between each detector up to a distance of min. 5 cm (With or withoutcable).
  • Manufactured for 24/7 Continuous Operation.

Model – Thruscan sl5-i

(includes all functions of the sX model plus the following)
  • 15 Real Detection Zones
  • Battery ON/OFF feature enabling/disabling battery backup mode.

Model – Thruscan Sx WP

(includes all functions of the sX model plus the following)

Model – Thruscan s6

  • Six Detection Zones- (Left/Right & Up/Middle/Down)
  • OPTIONAL- UPS enabling 2 hours operation without mains
  • Seasonal adjustment not required due to availability of Digital Electronic System (DSP)
  • IP 20 Protection

Model – Thruscan s9

(includes all functions of the sX model plus the following)
  • Nine Detection Zones (Left/Middle/Right & Up/Middle/Down)
  • Standard UPS enabling 2 hours operation without mains
  • 10 Security Levels
  • IP 40-41 Protection
  • 5 digit IN/OUT Counter
  • OPTIONAL – SCADA Remote Control Set – Send / Receive / Change Settings by PC

Model – sX

(includes all functions of the s9 model plus the following)
  • Mechanical Lock and Transparent Cover for Keypad
  • New Elegant Design (Single Piece Control Unit on Top)
  • Adjustable rate of Random Alarm (giving alarm for clean visitors at a selected ratio)
  • 20 Security Levels
  • Separate Zone Sensitivity Settings
  • Adjustable Alarm Duration
  • IP 44 Protection Level (EN 60529)
  • Recording of statistics of Operation Duration, Number of Visitors and Alarms (Real + Random Alarms)
  • IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
  • SMART DETECTOR – Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test
  • object, Fast and consistent calibration
  • Audible & Visual alarms can be monitored by PC and can be logged into Hard Disk. Optional Software
  • OPTIONAL – REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images

Door Frame/ Walk Through Metal Detector Model: ThruScan sXi-9P

  • International norms (NILECJ-0601 L1-5/NIJ 0601.02 Small test piece level sensitivity / EN60529, EN60068, EN60950 Classl/lP44). In conformity with CE European Union Norms and produced under ISO9001:2008 QMS and ECAC DOC30 Standard 2 Compliance, using ECAC/NIJ/TSAtest kits
  • Certified in compliance to EN6100-6-3, EN6100-6-1 regulations and in compliance with Directive 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)
  • Multi-Zone – 9 or 15 Real Detection Zones
  • Standard Preset Jailhouse/Airport/ Military/Police Premises, Shopping Mall Security Modes
  • Whilst Normal Operation, displays IN/OUT Counter and Security Level on Graphical LCD without abbreviations so that security staff can easily understand
  • Capable to detect both Ferrous and Non-Ferrous Metallic Threat Objects considered dangerous by International Security Authorities
  • Smart Detector-Fast and consistent calibration, automatic sensitivity program selects the correct sensitivity for a specific weapon or recognized test object
  • Displays the detected metal objects location on both side panels LEFT/RIGHT from bottom to top with continuous LED Zone indicators)
  • Detects all threat objects even concealed/hidden with camouflage and /or wrapped regadless of their orientation. Impossible for such threat objects to pass through the WTMD without causing an alarm
  • Homogenous magnetic field- no dead points-same detection capability from bottom to top
  • 20 sensitivity levels, 246 adjustable sensitivity steps at each, preset NILEG sensitivity program, 5 preset programs plus Automatic frequency selection feature & Separate Zone Sensitivity Setting Feature
  • Superior discrimination, precise target location identification/ graphic zone display on control unit
  • Auto calibration (Automatically calibrates itself up to environmental conditions) No set up changes necessary when relocated and/or new magnetic objects brought near-by.
  • Human health friendly “very low frequency” VLF technology, no effect on pace makers, pregnant women
  • Green / Red bicolor traffic through LEDs plus Metal density-mass, signal strength display at 10-level-VU meter with green, yellow, red LEDs & LED alarm indicators on side panels, easily allows sight from distance with throughput 60 persons/minute
  • Adjustable random alarm possibilities to give alarm for clean visitors at a selected ratio
  • Record statistics of operation duration, number of visitors and alarms (real/random alarms separately)
  • Special environmental magnetic interference display menu
  • Adjustable audio alarm at 10 tones/ level or soundless (mute) operation,
  • Adjustable alarm duration (detection speed regardless of alarms)
  • Reloading the factory default settings by one-touch button
  • Five digit incoming/outgoing & alarm counters (visible/invisible)-Reset
  • IR protection feature enabling perfect low false alarm operation/continous detection mode selection enabled
  • Interference free operation from other Electronic Devices and does not affect other electronic equipment. Necessary filtering precautions have been taken. No interference with Storage media, flash memory stick, CD
  • Four digit changeable digital pin code and mechanical lock
  • Automatic failure display with continuous self-checking of key parameters
  • Easy programming and display via high resolution LCD
  • 4 Menu languages. Standard are English, German, Spanish and Turkish
  • Relay output for recording CCTV, Photo taken recording, controlling turnstiles, etc based on alarms
  • Standard built in UPS enabling two hours operation without mains
  • Easy to mount and assemble, Manufactured for 24/7 operation
  • Interference free operation at Middle level sensitivity of 10cm distance constant metals and 200cm distance of moving metallic objects
  • Installation and operation without interference between two detectors up to a distance of min 5cm
  • Battery ON/OFF feature enabling operation without mains
  • Audio visual alarms are noticeable at a range of 4 meters
  • Micro processor settings does not change when there is an electricity cut-off
  • Magnetic field inside passage area is 0.1Gauss
  • All electronics are internal. No outer units
  • SCADA remote set – Send/ Receive, change settings by PC, Audio visual alarms can be monitored in real time by PC and can be logged. Software (Optional)
  • Real time video prosecution unit enabling recording alarms. Visitors pictures, or video with time stamp to SD card – 30,000 images (Optional)
  • IRDA- Remote control unit (optional)

Technical Specifications

  • Weight 59kg
  • Gross weight 68kg
  • Ambient Temperature -20°C to +70°C
  • Operating Voltage 70VAC to
  • 270VAC/50-60HZ
  • Power: Standby 10W/
  • Operational 20W (Alarms)
  • Net passage (mm): 740 x 580 x2200
  • External (mm): 900 x 580 x 2200
  • Package dimensions(W x H x L)
  • Box 1 (mm): 620 x 230 x 2265
  • Box 2 (mm) 790 x 230 x 400

-- Download CINT-TH-SCAN as PDF --